|Material:||Stainless Steel+special PVC||Color:||Polished|
|Diameter Of Wheel:||23-26 Mm||Wheel Thickness:||5-6 Mm|
|Application:||Sliding Glass Door,fan-shaped Door,acr Door.||Product Name:||Sliding Glass Door Rollers|
SS304 Sliding Patio Door Rollers,
Sliding Patio Door Rollers,
Polished SS304 sliding shower door rollers
304 stainless steel sliding door roller with three wheels
|Application||Sliding glass door,fan-shaped door,acr door.|
|Diameter of wheel||23-26mm|
|Can hold glass||6-8 mm|
|Diameter of hole||5 mm|
|Wheel thickness||5-6 mm|
|Stress less||30 kg|
|Material||304 stainless steel main body, stainless steel bearing,pvc|
|Loading port||Guangzhou ,Shenzhen port|
|Payment term||30% first pay,70% payment before deliver.|
|After sale service||Online training,online technical support.|
* stainless steel make the roller less noise ,anti-rust,long-life.
* special pvc let the roller running smoothly and long-life.
1) Your patio glass door will have two separate glass units.
One unit is the door that you slide and the other unit is stationary. First, stand outside your house and look at your sliding glass door. If the stationary door unit is between you and the sliding unit you will most likely have to remove the stationary unit so that you can get to the glass sliding unit.
Before you go through the trouble of removing the stationary door unit, first try to go inside your house and see if you can remove the sliding door unit. Usually you cannot because there is a lip along the bottom of the patio glass door frame (it keeps moisture out of the house) that prevents the sliding glass door from being removed from the inside.
If the rollers on the bottom of the door are difficult to get over the lip, you can adjust them to help you create more room (go down to step 2). If it is not the rollers but the sliding unit's frame preventing you from pulling the sliding unit out of the door frame, you are going to need to remove the stationary door unit first before you can remove the sliding unit.
To remove the stationary door unit, you first need to take out your screen door (if you have one). Lift one end of the screen door frame and use a screwdriver to lift the roller on the bottom of the screen door frame off of the track. Do this to both ends of the screen door and your screen door will pull out of the door frame.
The stationary door unit is held in place by a metal piece that runs along the bottom of the track from the corner of the stationary door unit to the bottom of the side jamb (there is a chance this piece is missing but if you do have one remove it from the track). After you have removed the metal piece, look for screws holding the stationary unit frame in place. After removing all of the screws try pulling the stationary door unit out of the door frame. If you are having trouble pulling out the stationary door unit, try placing a screwdriver between the stationary door unit's bottom frame and the track it is resting on. Lift up on the screwdriver while you have a helper pull out the stationary door unit from the door frame. Be careful not to use too much force with the screwdriver so that you do not damage the door track.
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q: How long your delivery time?
A: General is 15-20 days.and we can negotiation it.
Q: Do you provide samples?is it free or extra?
A: We can provide sample if first time cooperate,you need pay the sample and cost of shipping.
Q: What is you payment term?
A: Payment less 1000 USD,pay 100% in advance,payment over 1000 USD.,first pay 30%,settle the payment before delivery.
Q: What about your quality?
A: Usually we will confirm the sample by both,and our QC will strictly to check every step,and make sure every piece must be inspection before delivery.we accept change if there are seriously quality problem that affect your client use it.
Contact Person: FSMEIGAO